Boiler is how the classification? Press export steam parameters of how to classify? Classification of the automatic hot water fired boiler is very extensive concept from different angles have different classification, can be classified by application area, according to the export media classification, but also by the pressure of the boiler classification. If the classification parameters according to the steam outlet, then find out which parameters steam boiler, wherein the boiler comprises evaporation, steam pressure, steam temperature etc., and is classified according to the main points of the outlet steam pressure: low pressure boiler (P <2.5MPa ), pressure in the boiler (22.5
Nongfu Spring has been committed to the production of natural and healthy drinking water, only after a simple filtration, without changing the water quality, maintain natural water features indicators, unswervingly follow the environmental, health, natural path of development. Fast automatic hot water fired boiler since its inception, focused on research and development of clean boiler design, adhere to the concept of environmental protection has become condensing gas boiler industry leader. The same faith, the same dedication to promote fast boiler and Nongfu Spring work together to create new environmental future.
A gas automatic hot water fired boiler comprising a monitoring system that parts (1) capture the state of various equipment and system status; and (2) control the boiler and the various actuators. State acquisition device is mainly a state of the output point of the boiler, a circulation pump status point state point and given water supply pump, as well as tanks and other equipment. State point boiler including the boiler operating state point, the state point level tank, boiler fault state point, the boiler water temperature, return water temperature of the boiler, the boiler exhaust gas temperature; circulating pump, supply pump and an electric auxiliary control valve which state point frequency devices work. State acquisition system is divided into primary and secondary sides. A water circulation system between a primary side of the boiler to the heat exchanger, the secondary side to the water circulation system is mainly refers to the end of a heat exchanger circulation system. Acquired primary side water temperature state comprises a primary side, primary-side return water temperature, water pressure on the primary side, the primary return pressure, smoke and combustion temperature and the state of the working machine tank level,; the state of the secondary side includes a secondary collection side water temperature, return water temperature of the secondary side, the secondary side water pressure, the secondary pressure backwater; an outdoor temperature collection can automatically control monitoring system according to the outdoor temperature boiler. Boiler control the various actuators and control of the main boiler and stops the control of various electric valve. The boiler room various devices, instruments, sensors, actuators and communication module line monitoring system to achieve automatic control of the boiler room by performing data acquisition and control functions of the boiler room and other field devices, safe start-stop units, reached unattended.
Details of 25 ton oil steam automatic hot water fired boiler
SZS oil fired steam boiler applies D layout, longitudinal arrangements are installed for upper and lower drums. Membrane wall pipe are at the both side of wall of right hearth, super-heater is located at the turn of furnace outlet, and economizer is installed at the tail. With pressure-fired combustion, high combustion efficiency, lower funnel temperature and high efficiency, only air blower equipped with, little power consumption, and lower running expenses. With large hearth, full combustion, and wide adaptability of fuel. Our SZS series oil and gas boilers offer innovative design maximizing efficiency. These Water Tube boilers incorporate a furnace with a large surface area to maximize thermal heat transfer. The boilers are designed and manufactured to an accepted standard in ASME under an ISO9000 quality management system. In addition, third party inspection, by a Department of Labor approved body, is also carried out to independently verify quality during the manufacturing process.
