What are the matters needing attention in the retrofit of coal-fired 8 ton fired boiler for chemical industry?
With the implementation of the new environmental protection law and the introduction of new standards for the control of atmospheric pollution of boilers, the transformation of coal-fired boilers in various localities has been carried out in an orderly manner, and coal-fired boilers can be transformed into natural gas boilers in the actual operation. Can also be transformed into biomass boilers, but no matter how to reform, in addition to the choice of high-quality coal-fired boiler transformation company, but also need to pay special attention to the following matters.
1. When the boiler is dismantled, attention should be paid to shutting down the blower and stopping operation when the boiler is dismantled, and when the furnace temperature drops to an appropriate temperature, the boiler needs to be dismantled by the relevant parts of the existing boiler to be retrofitted to the coal-fired boiler. Stop the boiler induced fan, chain grate, then the workers enter the furnace from the fire door, remove the original furnace arch of the boiler, clean up the furnace interior, and then remove the main engine and auxiliary machinery of the boiler.
2. Attention to furnace reform is one of the key points in coal-fired boiler reform. The combustion conditions of existing boilers can be improved by reasonable transformation, which can not only accord with the combustion conditions of new fuels, but also play a better role in saving energy. However, it involves re-pouring the furnace, so special attention should be paid to keep the back arch pipe of the boiler away from the center of the flame, so that it will not be burned by the high temperature.
3. Attention should be paid to the modified boiler after a series of projects, such as retrofit of coal-fired boiler, pouring of new boiler front arch and back arch, etc., should be paid attention to after the retrofit of coal-fired boiler is carried out. One of the most important tests is to test the boiler body under certain pressure, and the boiler can be put into use only after the boiler has passed the test and revamped. These are a few things to pay attention to when reforming coal-fired boilers.
6 ton oil gas condensing 8 ton fired boiler for chemical industry used in paper mill
Last year, a paper mill based in Australia contracted a 6 ton oil gas condensing boiler which model is WNS6-1.25-Y.Q. Our company is responsible for all production work of this 6 ton/hr gas condensing steam boiler. The product utilizes condensation technology to effectively reduce the exhaust gas temperature and improve boiler efficiency. Moreover, the boiler adopts a number of advanced technologies to reduce the emission of harmful substances such as SOx, NOx and COx, and is an efficient and environmentally friendly solution for industrial boilers.
Our company attaches great importance to the quality of wine, winemaking process steam requirements provided very strict, party fast 8 ton fired boiler for chemical industry provides fully meet our needs, give us a brewery to provide strong support. --customer feedback
Different meaning of the data and the oxygen content of the exhaust gas fired 8 ton fired boiler for chemical industry: A boiler oil-fired boiler which, it is explained below target, because through knowledge and understanding of this kind of boiler, can broaden everyone's knowledge, and at the same time, familiar with the different boiler type, so as to achieve a comprehensive understanding of the boiler, do not miss any of which. 1. fuel boiler, 0.5 tons and 0.35mw, its meaning is the same as you? An oil boiler, and 0.5 tons 0.35mw these two parameters, which specifically refers to, and is not the same, because the former is the rated evaporation of the boiler, while the latter refers to the rated power of the boiler or the rated for heat. In addition, in the unit, the two are not the same. So, obviously, on this issue, that the answer is not the same. 2. Industrial boilers, oil-fired boiler is why the general level? In addition, the oxygen content in the exhaust gas boiler fuel, how much is more appropriate? Industrial boilers, if its use is oil-fired boiler, then, it generally is a Class B boiler, that is, the pressure of the boiler is rated at 2.5MPa or less. Oil-fired boiler exhaust gas oxygen content and, in general, is controlled within the range of 3% to 5% is appropriate. If less than 3%, the problem of incomplete combustion occurs.
